Search
Wireless Access Point on the grandMA2

Wireless Access Point on the grandMA2

  |  All

In this video Dominic Fanelli, Lighting Designer, walks us through setting up a wireless access point on the grandMA2 and connecting your remote device.

Step By Step Guide:

1 – Connect the AirPort Express LAN port to your computer via RJ45 cable.

*If the device does not show up as seen below; find it under ”Other Wi-Fi Devices” you will need

to do a basic setup before configuring the WAP settings.

Connect the AirPort Express LAN port

2 – Select your device and click edit to access the Airport settings.

Edit to access the Airport settings

3 – Under the “Base Station” tab you can change the base stations name and apply a password.

Change the base stations name and apply a password

4 – Under the “Wireless” tab you can give your network a name and apply a network password.

Give your network a name and apply a network password

5 – Under the “Network” tab you will set up the access point.

6 – Insure the “Router Mode” is set to DHCP and NAT.

7 – Then click “Network Options”

“Network” tab

8 – Under “Network Options” set the IPv4 range to 192.168.

9 – Then Adjust the IP range to suit your needs. We generally will apply a range of

192.168.1.200 to 240

Under “Network Options” set the IPv4 range to 192.168

10 – Bonus setup item! Turn off AirPlay.

11 – Click Update and allow your AirPort to restart.

12 – Connect the AirPort to the unmanaged switch on your MA network via the LAN RJ45 port.

13 – Connect your iPad to the MA wireless network and open the MA remote app. On the MA

console, provided you have Remotes/Login Enabled turned ON under “Global Settings” you will

see the consoles connected to your network.

Turn off AirPlay

   |